PLATINUM Twin Undersink Water Filter System Nanosilver ANTIBACTERIAL Premium Tap. Filter Systems Australia is a leading supplier of domestic and commercial water filtration solutions. Our own range of water filter systems is created here in Australia and we have carefully selected only the highest quality products to provide you with the best solutions for all your water filtration needs. We are proud to provide competitive pricing and our team are always happy to share their extensive knowledge and experience. When you request a free Personalise Home Water Filter Assessment you will receive a prompt personalised recommendation on the best water filter system for your home.
Why Choose Filter Systems Australia. We have a wide range of high quality water filtration systems, water filters and filtration components including leading water filtration solutions such as reverse osmosis water filters and ultraviolet sanitation. We provide same day dispatch, and competitive pricing as a direct importer of the highest quality products and our own range made right here in Australia. You can even order a water analysis online! Our team are passionate about water filters. With over 45 years of experience across our team, we specialise in problem water treatment, water testing, water treating and maintenance for at home use, aquarium industries, farming industries & commercial businesses. In cases where a PO box, Parcel locker or any other Australia Post Service is provided, we will have to use Australia Post who have a wider range of parcel restrictions. Filter Systems Australia enforces strict dispatch protocols to avoid human error where possible.
Orders are thoroughly checked and signed off, carefully packed to minimise chance of transit damage then recorded manually into a hard copy dispatch manifest. All orders MUST be checked for damage within 48 hours of being signed for as delivered (based on tracking details).
Please note that the above estimates are taken directly from Australia Posts Business Customer Information. If you require your item ASAP this is something you should select. Only provide an ATL on orders when there is a safe place for items to be left.
We work with food grade certified materials that must be un-opened and un-used as to meet the conditions of resale. You will receive a credit of equal amount, less the cost we incurred to send the item OR 20% of the item/order cost - whichever is greater. All orders MUST be checked for damage within 48 hours of receiving the parcel as stated from the tracking information provided from the courier/post company. As per Australian Plumbing Codes, all systems must be installed by a qualified plumber. Filter systems must be maintained as per FSA recommendations including the use of replacement filters, fittings and components supplied by FSA.
Filtration systems must be fitted with the supplied Pressure Limiting device to limit the pressure to 500 kPa or lower. Any contract of sale, order, or quotation made or accepted by or on behalf of Filter Systems Australia is subject to these terms and conditions of sale. Filter Systems Australia warrants each new product to be free from defects in material and workmanship for a period of 1 year from the date of retail sale established by the date of the original invoice issued by FSA. Any damage caused during or as a result of transit will not be the responsibility of FSA.
The date and by whom the product was installed. The location where the product was installed. The date and time the product first appeared to malfunction. The nature of the problem with the product. The date and time of any and all loss event/s. The date and time Filter Systems Australia was first notified of the product malfunction. Product damage results from water hammer, freezing, neglect or is not installed by a licensed plumber in accordance with the installation plan. The water temperature exceeds 38° Celsius. The system is not installed with an Australian Standards approved Pressure Limiting and Dual Check Valve.
This Water Filtration System is certified to WaterMark Standards AS/NZS 3497 Under the Certificate number 23247. WaterMark is the standard that is required by law for a qualified plumber in Australia to install any item on municipal town water. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes. Our WaterMark filtration systems are hand assembled here in Australia and are batch tested to ensure quality and workmanship for your filtration products.
GT17-0S - Plastic Opening Spanner. GT14-14S - 61 Inlet Tee Valve. GT20-16GW - 2 Metres 1/4 Tubing (White). GT9-9S - Bat Tap Standard Faucet.
GT10-23LS - 1/4 Elbow Fittings. GT18-13 - 500 kPa WaterMark Certified Pressure Limiting Valve. 1 x Roll Thread Tape. The cartridges in this system are standard 10" x 2.5" available through our store or from most hardware stores throughout Australia.
Complete system comes new in box, with 1x quality 5 Micron Sediment pre-filter and 1x 0.5 micron top of the range 100% Silver Coconut Carbon block filter for total reduction of chlorine taste and odour issues. The pressure limiting valve should be routinely replaced every 2 years to ensure your system is protected. Gone are the days of struggling to get the right amount of thread tape onto your fittings (such as the feed water block and brass ball valve).
Now, thanks to this handy combination fitting, it's simply a matter of interrupting your cold-water line with this tee and plugging in the 1/4 tubing to the filtration system. The other benefit of this fitting is that by having the built-in isolation switch you can easily turn the water on and off for cartridge changes. 5 Micron Polypropylene Spun Sediment Filter. Poly Spun is the best type of filtration you can get. They do not accumulate bacteria as much as other materials, as well as being high flow and low pressure drop.
5 micron is a reasonably fine filtration and would be suited on high quality bore water or town water or infront of RO's. 100% Virgin Polypropylene material - Compatible for Our WaterMark Certified Systems. Purefer Polypropylene filters are made using a unique single nozzle manufacturing process, where a single nozzle blows melted polypropylene onto a spinning 5 micron filter core. As more Polypropylene is blown, the filter diameter gradually widens and the outer density of the filter decreases. This unique manufacturing process gives Purefer filters a true Gradient Density that allows for a greater dirt holding capacity and higher filtration efficiency compared to standard melt blown filters made from multiple nozzle blowers. 100% Pure Bacteriostatic Silver Carbon Block Filters. This filter is similar to the H2-BLUE 100% Coconut Carbon Filter (4-6), but is impregnated with silver for the added benefits of carbon AND the bacteriostatic properties of silver impregnation. Whilst carbon effectively removes odours and taste issues from water, it will leave behind microscopic metal compounds in the form of minute ash/dust particles, which in turn prove to be a source of nourishment for bacteria. This bacteria feeds off the nutrients in the insoluble ash and can then be flushed into the drinking water supply. Is proven to stop the growth of ash/dust fed bacteria. When a cell of bacteria is absorbed into the carbon's structure, it comes into contact with silver ions. The sulphurhydryl group already within the bacterial cell reacts with the silver, producing a silver sulphur complex. The complex immobilises the respiratory activity of the bacterial cell by preventing the transfer of hydrogen and an oxidative reaction. The cell cannot reproduce and dies, reducing the risk of gastro illness by ingesting bacteria. Several factors need to be considered when recommending silver impregnated carbon for use in bacteriostatic filters. Coconut Carbon is rated to be one of the best base materials used in today's market. Coconut Carbon provides a much higher volume of micropores than coal, wood or lignite based carbon. Thus, resulting in a more effective removal of trihalomethanes (THM's) from municipal water supplies.
The larger surface area provides a more effective method of filtering common contaminates such as chlorine and chloramines. The unique raw material of the coconut shell and the carbon manufacturing process ensures exceptional hardness and low ash content.
This company only makes carbon cartridges. So their interest is dedicated to producing the finest Coconut Carbon cartridges at sensible prices. Twin Undersink Water Filter with Silver Carbon. Height: 358mm Width: 240mm Depth: 125mm. Lan Shan Reverse Osmosis 24v DC Booster Pump LS-8200 - LSRO-400G (13-35LS).
The item "PLATINUM Twin Undersink Water Filter System Nanosilver ANTIBACTERIAL Premium Tap" is in sale since Monday, March 13, 2017. This item is in the category "Home Appliances\Small Kitchen Appliances\Water Purification\Water Filters". The seller is "filtersystemsaustraliafsa" and is located in Gold Coast, QLD. This item can be shipped worldwide.
- Product Type: Water Filter
- Exact Type: Twin Undersink Water FIlter
- Ports: 1/4" F NPT
- Model: Platinum
- Filtration Method: Carbon/Charcoal
- Type: Under Sink Filter Kit
- MPN: GT1-46SS
- Brand: Filter Systems Australia