Premium Twin Undersink Water Filter System Watermark + Filters 1-46w

PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W

PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W   PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W

PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W. Filter Systems Australia is a leading supplier of domestic and commercial water filtration solutions. Our own range of water filter systems is created here in Australia and we have carefully selected only the highest quality products to provide you with the best solutions for all your water filtration needs.

We are proud to provide competitive pricing and our team are always happy to share their extensive knowledge and experience. When you request a free Personalise Home Water Filter Assessment you will receive a prompt personalised recommendation on the best water filter system for your home. Why Choose Filter Systems Australia. We have a wide range of high quality water filtration systems, water filters and filtration components including leading water filtration solutions such as reverse osmosis water filters and ultraviolet sanitation.

We provide same day dispatch, and competitive pricing as a direct importer of the highest quality products and our own range made right here in Australia. You can even order a water analysis online! Our team are passionate about water filters. With over 45 years of experience across our team, we specialise in problem water treatment, water testing, water treating and maintenance for at home use, aquarium industries, farming industries & commercial businesses.

In cases where a PO box, Parcel locker or any other Australia Post Service is provided, we will have to use Australia Post who have a wider range of parcel restrictions. Filter Systems Australia enforces strict dispatch protocols to avoid human error where possible. Orders are thoroughly checked and signed off, carefully packed to minimise chance of transit damage then recorded manually into a hard copy dispatch manifest.
All orders MUST be checked for damage within 48 hours of being signed for as delivered (based on tracking details). Please note that the above estimates are taken directly from Australia Posts Business Customer Information. If you require your item ASAP this is something you should select. Only provide an ATL on orders when there is a safe place for items to be left. We work with food grade certified materials that must be un-opened and un-used as to meet the conditions of resale.

You will receive a credit of equal amount, less the cost we incurred to send the item OR 20% of the item/order cost - whichever is greater. All orders MUST be checked for damage within 48 hours of receiving the parcel as stated from the tracking information provided from the courier/post company.
As per Australian Plumbing Codes, all systems must be installed by a qualified plumber. Filter systems must be maintained as per FSA recommendations including the use of replacement filters, fittings and components supplied by FSA. Filtration systems must be fitted with the supplied Pressure Limiting device to limit the pressure to 500 kPa or lower.

Any contract of sale, order, or quotation made or accepted by or on behalf of Filter Systems Australia is subject to these terms and conditions of sale. Filter Systems Australia warrants each new product to be free from defects in material and workmanship for a period of 1 year from the date of retail sale established by the date of the original invoice issued by FSA. Any damage caused during or as a result of transit will not be the responsibility of FSA. The date and by whom the product was installed.

The location where the product was installed. The date and time the product first appeared to malfunction. The nature of the problem with the product. The date and time of any and all loss event/s.

The date and time Filter Systems Australia was first notified of the product malfunction. Product damage results from water hammer, freezing, neglect or is not installed by a licensed plumber in accordance with the installation plan. The water temperature exceeds 38° Celsius. The system is not installed with an Australian Standards approved Pressure Limiting and Dual Check Valve. You can do so by clicking here. WATER TEST METERS & EQUIP. This Water Filtration System is certified to WaterMark Standards AS/NZS 3497 Under the Certificate number 23247. WaterMark is the standard that is required by law for a qualified plumber in Australia to install any item on municipal town water. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes. Our WaterMark filtration systems are hand assembled here in Australia and are batch tested to ensure quality and workmanship for your filtration products. GT1-22W - Twin Water Filter System with 1/4 Ports. GT2-2N - 5 Micron Gradient Polypropylene Spun.

GT4-6P - 1 Micron Coconut Carbon Block. GT17-0S - Plastic Opening Spanner. GT14-14S - Inlet Tee Valve. GT20-16GW - 2 Metres 1/4 Tubing (White). GT9-0S - Black Flick Tap Standard Faucet.
GT10-23LS - 1/4 Elbow Fittings. GT18-13 - 500 kPa WaterMark Certified Pressure Limiting Valve. 1 x Roll Thread Tape.

The cartridges in this system are standard 10" x 2.5" available through our store or from most hardware stores throughout Australia. Complete system comes new in box, with 1x quality 5 Micron Sediment pre-filter and 1x 1 micron top of the range 100% Coconut Carbon block. Filter for total reduction of chlorine taste and odour issues. The pressure limiting valve should be routinely replaced every 2 years to ensure your system is protected. Inlet Tee Compliant to NSF/ANSI 61. Gone are the days of struggling to get the right amount of thread tape onto your fittings (such as the feed water block and brass ball valve). Now, thanks to this handy combination fitting, it's simply a matter of interrupting your cold-water line with this tee and plugging in the 1/4 tubing to the filtration system. The other benefit of this fitting is that by having the built-in isolation switch you can easily turn the water on and off for cartridge changes. 5 Micron Polypropylene Spun Sediment Filter.

Poly Spun is the best type of filtration you can get. They do not accumulate bacteria as much as other materials, as well as being high flow and low pressure drop.

5 micron is a reasonably fine filtration and would be suited on high quality bore water or town water or infront of RO's. 100% Virgin Polypropylene material - Compatible for Our Watermark Certified Systems.

Purefer Polypropylene filters are made using a unique single nozzle manufacturing process, where a single nozzle blows melted polypropylene onto a spinning 5 micron filter core. As more Polypropylene is blown, the filter diameter gradually widens and the outer density of the filter decreases. This unique manufacturing process gives Purefer filters a true Gradient Density that allows for a greater dirt holding capacity and higher filtration efficiency compared to standard melt blown filters made from multiple nozzle blowers. 1 Micron 100% Coconut Carbon Filters. This high quality 100% Coconut Carbon filter is the exact filter we use as our front-line carbon filter. As a rule, it is difficult to find 100% coconut carbon filters. Most lower priced filters on the market are a blend of coconut carbon and coal based carbon.

The problem with coal based carbon is that it has a shorter life and often results in a less palatable flavour. We use this 100% coconut carbon filter in all of our pre-assembled kits.

They are top of the range HIGH QUALITY coconut carbon block filters, ideal for taste and odour issues, and perfect for total extraction of town water chemicals. This particular filter is currently supplied throughout the European market as a premium drinking water filter, and we are in a prime position to offer you this high-quality filter at rock bottom prices, direct from importer to the public. The perfect carbon block filter is made from 100% Coconut Shell Carbon, which creates what many believe to be sweetest tasting water. The unique pore structure of this carbon is well suited for chemical absorption, including VOC's, while reducing chlorine and chemicals that contribute to taste and odour.

They are best suited for eliminating taste and odour in tank water supplies, or extraction of chemicals in town water supplies. Carbon filtration is the best form of filtration for chemical extraction due to the longer and more thorough contact time the water has with the carbon, which in turn provides an extremely comprehensive method of chemical removal.

We HIGHLY recommend this method of filtration for chemical taste and odour extraction. Complete with NSF/ANSI 42 Compliant Filters. Height: 358mm Width: 240mm Depth: 125mm.

12 Stage Chrome Shower Filter Remove Chlorine Heavy Metals + Spare Filter 39-19. 100 x 1/4" Nipple Joiners Suitable for housings with 1/4" Ports (19-8G).

Tubing for Water Filtration Fridge Filters Coolers (6mm) 1/4 Per Metre (20-16). Whole House Water Filter System 20" x 4.5" SS Bracket Chloramine Removal 1-9WMSL. Join now to receive latest updates & exclusive offers from Filter Systems Australia. The item "PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W" is in sale since Tuesday, June 16, 2015.

This item is in the category "Home Appliances\Small Kitchen Appliances\Water Purification\Water Filters". The seller is "filtersystemsaustraliafsa" and is located in Gold Coast, QLD.

This item can be shipped worldwide.

  • Product Type: Water Filter
  • Exact Type: Twin Undersink Water FIlter
  • Ports: 1/4" F NPT
  • Sediment Filter: Poly Spun
  • Chemical Filter: 100% Coconut Carbon
  • Model: Premium
  • Filtration Method: Carbon
  • Type: Under Sink Filter Kit
  • MPN: GT1-46W
  • Brand: Filter Systems Australia

PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W   PREMIUM Twin Undersink Water Filter System WaterMark + Filters 1-46W

Submitted by admin on