Whole Home Iron Removal Filter System Katalox Light Fleck 2510sxt Aio 1.5cf

Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF

Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF  Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF

Whole House Katalox Light Water Filtration System. Fleck 2510 SXT Backwash Valve AIO Oxygen Chamber System Digital Control Valve. Katalox Light® systems offer a new technology with advanced catalytic filtration available in water treatment industry. All systems have been engineered keeping both professionals and consumers in mind. Systems are available with different models and customized for manual backwash without using electricity or it can be made fully-automatic.
System can be used in a variety of applications including residential, commercial and any process water applications for food and beverage industry. Standard systems are designed with a filtration velocity of 20 m/h (8.2 gpm/ft2) to provide a good filtration. This value may differ for advanced application like Arsenic, Radium, Uranium and other Heavy Metal removal where co-precipitation process requires higher contact time thus lower filtration velocity.

Running the system at higher velocity may compromise the filtration performance. Virtually there is no flow rate limitations for KL systems as KL units can be configured in parallel to address industrial high flow requirements. Recommended System Operating Conditions: Inlet water pH 5.8 - 10.5. Recommended Maximum Flow Rate 5 GPM.

1 - FRP Tank 1054. 1 - Fleck 2510 SXT Backwash Valve AIO Oxygen Chamber System DIgital Control Valve. 1 - 1.5 Cu Ft Katalox Light®. 1 - ByPass Valve - 1. Hydrogen sulfide concentrations exceeding 7 to 10 ppm can be removed by injecting an oxidizing chemical such as household bleach followed up by filtration.

The oxidizing chemical should enter the water upstream from the storage or mixing tank to provide at least 30-45 minutes of contact time between the chemical and water. The length of length of the holding time is a function of the chemical dosage, tank configuration and water temperature. Sulfur particles can then be removed using a sediment filter and the excess chlorine can be removed by activated carbon filtration. If test results indicate that bacterial contamination is occurring, shock chlorination or disinfection is the most widely suggested method for initial treatment.

Shock chlorination (disinfection) is the one-time introduction of a strong solution into the entire water distribution system well, pump, distribution pipeline, etc. When to Shock Disinfect the Well. Shock chlorination (disinfection) is recommended when lab results indicate a presence of bacteria upon completion of a new well or after pump replacement or repair, when the distribution system is opened for repairs or maintenance, following contamination by flood water, to control iron and sulfur bacteria.

Shock chlorination (disinfection) is recommended in these circumstances to ensure that bacterial contamination is controlled. This system should be used where low to moderate ferrous (dissolved) iron or hydrogen sulfide contamination is known. This filter is most effective where iron and hydrogen sulfide levels are less then 5 ppm. Best removal rates are achieved where pH is between 6.5 and 8.5 and where water contains some dissolved oxygen. Selecting a water treatment system begins with water test results from a certified drinking water testing lab. Such test results should be compared to the water treatment product specifications to ensure that the treatment system being considered is designed to treat. The substances you want to treat. In the concentrations at which they exist in your water. There is no one-size-fits-all water treatment technology that addresses all water quality problems. In some cases, one treatment technology may meet all your specific needs. In other cases, you may need a treatment traina series of treatment technologies in a sequence that treat one or more water quality problems.

Again, when considering water treatment, use your lab test results as a guide and make sure the technology you are considering is designed to treat the problematic substances in your wate. Used or installed items are not eligible for return. The item "Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF" is in sale since Friday, October 12, 2018. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters". The seller is "123waterfilter" and is located in Lancaster, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Model: TWP1054-2510AIO
  • Country/Region of Manufacture: United States
  • Filtration Method: Carbon/Charcoal
  • Type: Whole Home Filter
  • Compatible Model: Titan
  • Color: Black
  • MPN: TWP2510SXT
  • Contaminant Removal: Iron
  • Power: 110V
  • Number of Filtrations: 1
  • Brand: PRO
  • Suitable For: Commercial

Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF  Whole Home Iron Removal Filter System Katalox Light Fleck 2510SXT AIO 1.5CF

Submitted by admin on